Tricon Steel & Alloys offers Titanium Grade 5 Sheets, Plates, and Coils made from an alloy of titanium and aluminium. It ensures top-notch quality and precise dimensions in its Grade 5 titanium products, meeting stringent industry standards. Tricon's offerings are committed to reliability and durability and cater to diverse industrial requirements.

Titanium Grade 5 Sheets, Plates, and Coils typically contain approximately 90% titanium, 6% aluminium, and 4% vanadium. This alloy composition provides excellent mechanical properties to these sheets, plates & coils.

Titanium Grade 5 Sheets, Plates, and Coils boast a density of around 4.43 g/cm³. They exhibit a yield strength of approximately 950 MPa and a tensile strength of about 1,000 MPa. Moreover, their thermal conductivity typically ranges from 6.7 to 20.9 W/m·K. These properties collectively make Grade 5 titanium products ideal for high-performance applications requiring strength and durability.

Titanium Grade 5 Sheets, Plates, and Coils are renowned for their weldability, allowing for seamless joining with other titanium alloys or dissimilar metals. They offer excellent machinability, facilitating precise shaping and finishing. Heat treatment can enhance their mechanical properties, with annealing improving ductility and stress-relief treatments reducing residual stresses, ensuring optimal performance in diverse applications.

Titanium Grade 5 Sheets, Plates, Coils

Our team carefully packs Titanium Grade 5 Sheets, Plates, and Coils. Tricon Steel & Alloys uses high-quality packages as per industrial standards. Packing is done so that no dirt or dust can accumulate on the product and degrade its quality. We ship the product to the customer within a short period. All the Titanium Grade 5 Sheets, Plates, and Coils we manufacture will perform well, last a long time, and be easy to use.

Due to their exceptional strength and biocompatibility, titanium Grade 5 Sheets, Plates, and Coils are widely used in aerospace components such as aircraft frames and engine parts and medical implants such as orthopedic and surgical instruments.

Titanium Grade 5 Sheets Specifications

Specifications ASTM B265 / ASME SB265
Dimensions MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc
Size Range Cold Rolled : 0.5-6.4 mm
Hot Rolled : 3.0–10.0 mm
Thickness 0.3 mm to 120 mm
Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Tolerances (width / thickness EN 10258/ DIN 59381
EN 10151
EN 10088
Form Sheet, Plain Sheet, Flat Shim, Flat Sheet, Shim Sheet, Rolling Sheet, soft annealed, descaled, sheared, annealed
Finish 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, mirror etc.
Hardness Half Hard, Soft, Hard, Quarter Hard, Spring Hard
Value Added Service Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc.
Profiling Plasma Plate Cutting
Laser Plate Cutting
Oxy-propane Flame Cutting

Titanium Gr 5 Sheets, Plates, Coils Manufacturing Process

Reheating Furnace

A reheating furnace is a crucial component in the steel manufacturing process, particularly for hot rolling mills where sheets or slabs are heated prior to rolling.

Scale Breaker

A scale breaker, also known as a descaler, is a piece of equipment used in the steel manufacturing process to remove scale from the surface of hot-rolled steel products. Scale refers to the iron oxide layer that forms on the surface of steel when it is heated to high temperatures during the manufacturing process.

Finish Rolling

Finish rolling, also known as final rolling, is the last stage in the hot rolling process of steel or other metals. It involves reducing the thickness of the material to its final desired dimensions and achieving the required surface finish.

Skin Pass Mill

A skin pass mill, also known as a temper mill or a rolling mill, is a specialized type of rolling mill used in the steel or metal industry to improve the surface finish and mechanical properties of cold-rolled steel coils or sheets. It operates after the cold rolling process and before further processing or coating.

Sheets, Plates, Coils Manufacturing Process

Titanium Gr 5 Sheets, Plates, Coils Equivalent Material

STANDARD WERKSTOFF NR. UNS
Titanium Grade 5 3.7035 R50400

Titanium Gr 5 Sheets, Plates, Coils Chemical Composition

Grade C Ti N Fe H O V Al
Titanium Gr 5 0.1 max 99.2 min 0.03 max 0.3 max 0.015 max 0.25 max

Titanium Grade 5 Sheets, Plates, Coils Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
4.5 g/cm3 1665 °C (3030 °F) Psi – 39900 , MPa – 275 Psi – 49900 , MPa – 344 20 %

Buy High Quality ASTM B265 Titanium Alloy Gr 5 Sheets.

Give us a call or send us an email to discuss how we can help you build your business. Working with such an esteemed client as you will make us happy.

Types Of Titanium Grade 5 Sheets, Plates, Coils

Coils

Titanium Grade 5 Coil

Strips

Titanium Gr 5 Strip

Shim Sheet

Grade 5 Titanium Shim Sheet

Foils

Titanium Gr 5 Foils

We also supply Titanium Grade 5 Sheet at the best price. You can check our latest Titanium Alloy Gr 5 Plates price list. Contact Tricon Steel & Alloys today for a best offer & competitive quotation Of Ti Alloy Grade 5 Coils.

What Industries Use Titanium Gr 5 Sheets, Plates, Coils ?

Export Countries

have Questions?
Call Now!

back top