Tricon Steel & Alloys is a well-known inconel 718 Sheets, Plates, and Coils manufacturer and supplier. These products are crafted to meet industry standards, making them ideal for applications in diverse industries. Tricon Steel & Alloys delivers top-quality Inconel 718 products tailored to full industrial requirements and reinforces its reputation as a trusted supplier.
Inconel 718 Sheets, Plates, and Coils consist primarily of nickel (around 50-55%), chromium (17-21%), and iron (balance). Additionally, they contain smaller percentages of niobium (5-7%), molybdenum (2.8-3.3%), titanium (0.65-1.15%), and aluminum (0.2-0.8%). These precise compositions impart exceptional mechanical properties.
Table Of Content
Inconel 718 Sheets exhibit impressive mechanical properties, with a tensile strength typically ranging from 1200 to 1400 MPa and a yield strength of approximately 1000 MPa. The density of Inconel 718 is around 8.2 g/cm³. In terms of thermal conductivity, it ranges from 6.1 to 11.1 W/m·K depending on the temperature and heat treatment.
Inconel 718 sheets and plates offer exceptional features, including high temperature and corrosion resistance. Their superior mechanical properties, such as high tensile and yield strength, ensure reliability under extreme conditions. Additionally, Inconel 718 Plates exhibits excellent weldability, allowing for ease of fabrication. With its versatility and durability, Inconel 718 is a preferred choice for components requiring resilience in harsh environments and critical performance requirements.
Tricon Steel & Alloys highly value quality, putting all our materials through extensive testing before delivery. The Hardness Test, Chemical Analysis, PMI Testing, Micro and MacroTest, Flaring Test, Pitting Resistance Test, and IGC Test are some of these tests. Invoices, packing lists, and a legally recognized Certificate of Origin are among the paperwork we offer for client satisfaction. We also provide a third-party inspection certificate for all our products.
Due to their exceptional properties, Inconel 718 Sheets, Plates, and Coils are used in high-temperature applications such as gas turbine components, jet engine thrust reversers, and combustion chambers. Inconel 718 Coils are also used in chemical processing, nuclear reactors, and the aerospace industries.
Specifications | ASTM B670 / ASME SB670 |
Dimensions | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
Size Range | Cold Rolled : 0.5-6.4 mm Hot Rolled : 3.0–10.0 mm |
Thickness | 0.3 mm to 120 mm |
Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
Tolerances (width / thickness | EN 10258/ DIN 59381 EN 10151 EN 10088 |
Form | Sheet, Plain Sheet, Flat Shim, Flat Sheet, Shim Sheet, Rolling Sheet, soft annealed, descaled, sheared, annealed |
Finish | 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, mirror etc. |
Hardness | Half Hard, Soft, Hard, Quarter Hard, Spring Hard |
Value Added Service | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
Profiling | Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting |
Reheating Furnace
A reheating furnace is a crucial component in the steel manufacturing process, particularly for hot rolling mills where sheets or slabs are heated prior to rolling.
Scale Breaker
A scale breaker, also known as a descaler, is a piece of equipment used in the steel manufacturing process to remove scale from the surface of hot-rolled steel products. Scale refers to the iron oxide layer that forms on the surface of steel when it is heated to high temperatures during the manufacturing process.
Finish Rolling
Finish rolling, also known as final rolling, is the last stage in the hot rolling process of steel or other metals. It involves reducing the thickness of the material to its final desired dimensions and achieving the required surface finish.
Skin Pass Mill
A skin pass mill, also known as a temper mill or a rolling mill, is a specialized type of rolling mill used in the steel or metal industry to improve the surface finish and mechanical properties of cold-rolled steel coils or sheets. It operates after the cold rolling process and before further processing or coating.
STANDARD | WERKSTOFF NR. | UNS |
Inconel 718 | 2.4668 | N07718 |
Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
718 | 0.08 max | 0.35 max | 0.35 max | 0.015 max | 0.30 max | - | 50.00 - 55.00 | 17.00 - 21.00 |
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) |
8.2 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 482 | 45 % |
Give us a call or send us an email to discuss how we can help you build your business. Working with such an esteemed client as you will make us happy.
Please Call On +91 9892770720 Or Mail Us On info@triconsteels.com
We also supply Inconel 718 Sheet at the best price. You can check our latest Inconel Alloy 718 Plates price list. Contact Tricon Steel & Alloys today for a best offer & competitive quotation Of Alloy 718 Coils.
Oil & Gas
Industry
Power Plant Generation
Petrochemical Industry
Marine
Industry
Aerospace
Industry
Chemical
Industry
Pharmaceuticals Industry
Cement
Industry