ASTM A709 Grade 36 Manufacturers & Suppliers in India

ASTM A709 Grade 36 Plate, manufactured & supplied by Tricon Steel & Alloys, is a high-strength, carbon steel plate. This plate conforms to ASTM standards and undergoes quality control measures to ensure consistent performance and reliability in demanding structural applications. Tricon Steel & Alloys specializes in providing customers with ASTM A709 Grade 36 Plates in various grades, shapes, sizes, standards, specifications, dimensions, and classes.

ASTM A709 Grade 36 plate typically contains elements such as carbon, manganese, phosphorus, sulfur, silicon, copper, chromium, nickel, molybdenum, and vanadium in specific proportions to meet mechanical and chemical properties requirements. The exact composition may vary slightly depending on the manufacturer and specific product specifications.

Table Of Content

What is ASTM A709 Gr36 Carbon Steel Sheets, Plates, Coils
ASTM A709 Gr36 specifications
ASTM A709 Gr36 Sheets, Plates, Coils Chemical Composition
ASTM A709 Gr36 Sheets, Plates, Coils Mechanical Properties
Types Of ASTM A709 Gr36 Sheets, Plates, Coils
Application Industries Of ASTM A709 Gr36 Sheets, Plates, Coils

ASTM A709 Grade 36 plate exhibits good strength, ductility, and weldability, making it suitable for various structural applications. Its physical properties include a density of around 7.85 g/cm³. The mechanical properties typically include a minimum yield strength of 250 MPa (36 ksi) and a minimum tensile strength of 400-550 MPa (58-80 ksi).

This carbon steel plate grade offers excellent formability and can be easily machined and welded, making it versatile for construction projects. Additionally, it offers good corrosion resistance, particularly in atmospheric environments, due to its composition and surface finish. ASTM A709 Grade 36 plate doesn't typically undergo heat treatment but may be stress-relieved after welding. It exhibits excellent weldability due to its low carbon content and mechanical properties, allowing various welding techniques without preheating. Proper cleaning and welding procedures are essential to ensure quality welds.

At Tricon Steel & Alloys, our products meet the highest industry standards. Our offerings include commercial invoices, packaging lists, fumigation certificates, heat treatment charts, quality assurance plans, and approved lab test reports. Trust us as your preferred choice for the ASTM A709 Grade 36 plate, where quality and performance converge seamlessly.

ASTM A709 Grade 36 plate is commonly used to construct bridges, buildings, and other infrastructure projects requiring high-strength structural components.

ASTM A709 Gr36 Sheets Specifications

Specifications	ASTM A709 Gr36
Dimensions	MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc
Size Range	Cold Rolled : 0.5-6.4 mm Hot Rolled : 3.0–10.0 mm
Thickness	0.3 mm to 120 mm
Width	1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length	2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
International Standard	ASTM A480 ASTM A959 ASME IID EN ISO 9445 EN ISO 18286 EN 10051 EN 10088-1 ISO 15510
Tolerances (width / thickness	EN 10258/ DIN 59381 EN 10151 EN 10088
Form	Sheet, Plain Sheet, Flat Shim, Flat Sheet, Shim Sheet, Rolling Sheet, soft annealed, descaled, sheared, annealed
Finish	2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, mirror etc.
Hardness	Half Hard, Soft, Hard, Quarter Hard, Spring Hard
Value Added Service	Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc.
Profiling	Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting

ASTM A709 Gr36 Sheets, Plates, Coils Manufacturing Process

Reheating Furnace

A reheating furnace is a crucial component in the steel manufacturing process, particularly for hot rolling mills where sheets or slabs are heated prior to rolling.

Scale Breaker

A scale breaker, also known as a descaler, is a piece of equipment used in the steel manufacturing process to remove scale from the surface of hot-rolled steel products. Scale refers to the iron oxide layer that forms on the surface of steel when it is heated to high temperatures during the manufacturing process.

Finish Rolling

Finish rolling, also known as final rolling, is the last stage in the hot rolling process of steel or other metals. It involves reducing the thickness of the material to its final desired dimensions and achieving the required surface finish.

Skin Pass Mill

A skin pass mill, also known as a temper mill or a rolling mill, is a specialized type of rolling mill used in the steel or metal industry to improve the surface finish and mechanical properties of cold-rolled steel coils or sheets. It operates after the cold rolling process and before further processing or coating.

Sheets, Plates, Coils Manufacturing Process

ASTM A709 Gr36 Sheets, Plates, Coils Chemical Composition

Grade	C	Mn	P	S	Si
A709 Gr36	0.25 max.	0.8-1.2	0.04 max	0.05 max	0.40 max

ASTM A709 Gr36 Sheets, Plates, Coils Mechanical Properties

Grade	Tensile Strength (mpa)	Yield Strength (mpa)	Elongation
ASTM A36	400-500	250	20%

Buy High Quality ASTM A709 Gr36 Sheets.

Give us a call or send us an email to discuss how we can help you build your business. Working with such an esteemed client as you will make us happy.

Please Call On +91 9892770720 Or Mail Us On info@triconsteels.com

Types Of ASTM A709 Gr36 Sheets, Plates, Coils

ASTM A709 GR36 PERFORATED SHEET

ASTM A709 GR36 CHEQUERED PLATE

ASTM A709 GR36 SHIM SHEET

ASTM A709 GR36 COIL

ASTM A709 GR36 STRIP

ASTM A709 GR36 HOT ROLLED SHEET

ASTM A709 GR36 COLD ROLLED PLATE

ASTM A709 GR36 FOILS

We also supply ASTM A36 Sheets at the best price. You can check our latest ASTM A36 Plates price list. Contact Tricon Steel & Alloys today for a best offer & competitive quotation Of ASTM A36 Coils.

Call Us Now Mail Us Now