Tricon Steel & Alloys is a premier ASTM A285 Grade C Plate manufacturer in India, excelling in manufacturing, supplying, and exporting top-quality carbon steel plates. These plates comply with moderate strength and meet ASTM standards for pressure vessel plates. With a high-quality finish and precise dimensions, this plate is suitable for various industrial applications requiring reliable performance under elevated temperatures and pressure conditions.
The ASTM A285 Grade C Plate typically contains carbon (0.16%), manganese (0.90%), phosphorus (0.025%), sulfur (0.025%), silicon (0.35%), and traces of other elements. This composition ensures adequate strength and weldability for pressure vessel applications.
Table Of Content
The ASTM A285 Carbon Steel Grade C Plate exhibits a tensile strength ranging from 55,000 to 75,000 psi, with a minimum yield strength of 30,000 psi. It offers formability and weldability with moderate carbon content, strength, and toughness at moderate temperatures. These plates resist corrosion and oxidation, ensuring longevity in harsh environments. Its precise dimensions and high-quality finish make it a reliable choice for critical applications.ASTM A285 Grade C Carbon Steel Plate finds application in various industries for fabricating pressure vessels, storage tanks, boilers, and other high-pressure equipment.
ASTM A285 Grade C Carbon Steel Plate is easily weldable using common welding methods such as SMAW, GMAW, and GTAW. Preheating is necessary for thicker sections to prevent cracking. Machining of this plate is feasible, but it requires low cutting speeds and proper tooling due to its higher carbon content.
Tricon Steel & Alloy's commitment to quality is evident in the documentation accompanying our ASTM A285 Grade C Plate. We provide commercial invoices, packaging lists, fumigation certificates, heat treatment charts, quality assurance plans, and approved lab test reports. Various test certificates ensure the highest standards, including MTC as per EN 10204/3.1b, PMI Test Certificate, and 100% radiography test report. This documents and reports transparency and 100% customer satisfaction.
Specifications | ASTM A285 / ASME SA285 |
Dimensions | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
Size Range | Cold Rolled : 0.5-6.4 mm Hot Rolled : 3.0–10.0 mm |
Thickness | 0.3 mm to 120 mm |
Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
International Standard | ASTM A480 ASTM A959 ASME IID EN ISO 9445 EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 |
Tolerances (width / thickness | EN 10258/ DIN 59381 EN 10151 EN 10088 |
Form | Sheet, Plain Sheet, Flat Shim, Flat Sheet, Shim Sheet, Rolling Sheet, soft annealed, descaled, sheared, annealed |
Finish | 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, mirror etc. |
Hardness | Half Hard, Soft, Hard, Quarter Hard, Spring Hard |
Value Added Service | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
Profiling | Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting |
Reheating Furnace
A reheating furnace is a crucial component in the steel manufacturing process, particularly for hot rolling mills where sheets or slabs are heated prior to rolling.
Scale Breaker
A scale breaker, also known as a descaler, is a piece of equipment used in the steel manufacturing process to remove scale from the surface of hot-rolled steel products. Scale refers to the iron oxide layer that forms on the surface of steel when it is heated to high temperatures during the manufacturing process.
Finish Rolling
Finish rolling, also known as final rolling, is the last stage in the hot rolling process of steel or other metals. It involves reducing the thickness of the material to its final desired dimensions and achieving the required surface finish.
Skin Pass Mill
A skin pass mill, also known as a temper mill or a rolling mill, is a specialized type of rolling mill used in the steel or metal industry to improve the surface finish and mechanical properties of cold-rolled steel coils or sheets. It operates after the cold rolling process and before further processing or coating.
Grade | C | Mn | P | S | Ti | Cr | Cu | Mo |
ASTM A285 Grade C | 0.16 | 0.4 - 1.2 | 0.03 | 0.03 | 0.03 | 0.03 | 0.03 | 0.08 |
Grade | Tensile Strength (mpa) | Yield Strength (mpa) | Elongation |
ASTM A285 GradeC | 380-515 | 205 | 27% |
Give us a call or send us an email to discuss how we can help you build your business. Working with such an esteemed client as you will make us happy.
Please Call On +91 9892770720 Or Mail Us On info@triconsteels.com
We also supply ASTM A285 GrC Sheets at the best price. You can check our latest ASTM A285 GrC Plates price list. Contact Tricon Steel & Alloys today for a best offer & competitive quotation Of ASTM A285 GrC.
Oil & Gas
Industry
Power Plant Generation
Petrochemical Industry
Marine
Industry
Aerospace
Industry
Chemical
Industry
Pharmaceuticals Industry
Cement
Industry